Description
- 2.5 Aluminum Series remote reservoir secondary shocks with CDEV multiplies front shock damping ability
- Adjustable track bar ensures proper axle placement and improves handling
- Bolt-in system fits in OE coil bucket location
- Corrosion resistant CAD plated coilover shock bodies with 7/8″ shafts
- Decreased body roll and improved on and off-road ride dynamics
- Fabricated radius arms offer on vehicle caster adjustment, increased strength, and improved tire clearance at steering lock
- FK Rod End bearings for extended longevity and minimal deflection
- ICON 2.5 Centerline steering stabilizer kit with piggyback reservoir offers increased steering damping
- ICON engineered coil springs guaranteed for life against sagging or breakage
- ICON Intelligent Control (IIC) uses onboard sensors to monitor G-forces and movement of vehicle chassis along with user defined settings to actively make near instantaneous compression damping changes
- ICON’s CDE Valve technology allows for in vehicle adjustment of compression damping settings and active adjustment via the ICON Intelligent Control (IIC)
- Ride height adjustable coilovers provide 2.5-3″ of lift
- Shocks are fully rebuildable and revalveable
- Track bar drop bracket reduces track bar angle and corrects bump steer geometry
- Vehicle-specific shock valving provides unparalleled ride quality and control
- OEM Wheels & Tires Fitment: Yes
- APPLICATION NOTE #1: Only fits 4WD models
- APPLICATION NOTE #155: Requires recalibration of Advanced Driver Assistance Systems (ADAS) after install
- APPLICATION NOTE #161: If equipped with OnBoard Scales also requires sensor bracket part number 66203
- APPLICATION NOTE #198: An iOS operated device is required to run ICON Intelligent Control App
- APPLICATION NOTE #3: Not compatible with F-350 Cab & Chassis models
- APPLICATION NOTE #55: Shocks are fully serviceable. Lift heights indicated are for a stock equipped vehicle.
- APPLICATION NOTE #88: Removal of the coil centering cup in factory coil bucket required for installation.
- Recommended Aftermarket Tires: 35″ x 12.50″ (37″ x 12.50″ tires may fit but fender trimming and modifications will be required.)
- Recommended Aftermarket Wheels: ICON Alloys – 17×8.5″ w/ 5” Backspace / 6mm Offset
- Recommended Aftermarket Wheels: ICON Alloys – 18×9″ w/ 5.25” Backspace / 6mm Offset
- Recommended Aftermarket Wheels: ICON Alloys – 20×9″ w/ 5.25” Backspace / 6mm Offset
- TECH NOTE: Brake line kit (Part # 61111) is optional for end users who do not want to bend the factory steel lines or are looking for a braided stainless upgrade (not necessary for complete install)
- TECH NOTE: Diesel models equipped with Tremor package will have front lift height range of 1.5-2″ over stock
- TECH NOTE: Diesel models without Tremor package will have front lift height range of 2.5-3″ over stock
- TECH NOTE: Due to tight clearances and varying placement of vehicle’s wiring harness in the upper front-passenger wheel well area, installer must ensure adequate clearance between the harness, coilover reservoir, and other components to prevent chafing/da
- TECH NOTE: Gas models equipped with Tremor package will have front lift height range of 2-2.5″ over stock
- TECH NOTE: Gas models without Tremor package will have front lift height range of 3-3.5″ over stock
- TECH NOTE: Included rear shocks are compatible with 0-3″ of rear lift over stock
