Description
The 2020-2022 Ford Super Duty trucks sit at a lower ride height than 2017-2019 models, and although many of the 2017-2019 components will physically fit 2020-2022 models, the resulting ride height is often taller than desired. So, engineers at ICON designed new progressive rate coil springs that achieve the correct advertised lift heights while still retaining the great ride quality, predictability, and performance that our Super Duty systems are known for.
- 100% Bolt-on system – no drilling, cutting or welding necessary for install
- Application specific alignment cams ensure proper caster alignment
- ICON engineered dual rate coil springs provide 2.5 of front lift over stock
- Increased wheel travel and improved ride quality over stock with no change in towing capacity
- Leaf spring expansion packs and blocks for more compliant ride quality and reduced axle wrap
- Less body-roll than stock
- Lifetime guarantee that springs wont sag or break
- No drive shaft modifications required
- On-vehicle adjustable track bar for optimum front axle centering and minimal deflection
- Shocks are fully rebuildable and re-tunable
- Vehicle specific tuned piggyback reservoir 2.5 Aluminum Series shocks
- OEM Wheels & Tires Fitment: Not compatible with all available OE wheel/tire combinations. Aftermarket wheels with lower offset/less backspace recommended.
- APPLICATION NOTE #115: Lift Heights Based On 4Wd Crew Cab Diesel
- APPLICATION NOTE #119: Rare Cases Require A 2.6 Degree Alignment Cam On One Side Of Vehicle For Proper Caster Split
- APPLICATION NOTE #151: Fits Single Rear Wheel Models Only
- APPLICATION NOTE #6: Springs Are Rated For Diesel Engines Only
- Recommended Aftermarket Tires: 35″ x 12.50″ (37″ x 12.50″ tires may fit but fender trimming and modifications will be required.)
- Recommended Aftermarket Wheels: ICON Alloys – 17×8.5″ w/ 5” Backspace / 6mm Offset
- Recommended Aftermarket Wheels: ICON Alloys – 18×9″ w/ 5.25” Backspace / 6mm Offset
- Recommended Aftermarket Wheels: ICON Alloys – 20×9″ w/ 5.25” Backspace / 6mm Offset
- TECH NOTE: Brake line kit (Part # 61111) is optional for end users who do not want to bend the factory steel lines or are looking for a braided stainless upgrade (not necessary for complete install)
- TECH NOTE: Compatible with 4WD models only
- TECH NOTE: ICON track bar bracket part # 64039 is also recommended to correct bump steer geometry
- TECH NOTE: Not compatible with F-350 Cab & Chassis models
- TECH NOTE: Replaces OE rear blocks for .5″ of rear lift over stock on F-250. Lowers F-350 rear ride height by .5″ compared to stock.
- TECH NOTE: Trucks equipped with Tremor package with have front lift height of 1.5″ over stock
